Dell Force10 MXL Blade - Graceful-Restart Helper-Reject; Ip Ospf Auth-Change-Wait-Time

Open Shortest Path First (OSPFv2) | 397
By default, FTOS implements an enhanced flooding procedure that dynamically and intelligently
determines when to optimize flooding. Whenever possible, the OSPF task attempts to reduce flooding
overhead by selectively flooding on a subset of the interfaces between two routers.
When flood-2328 is enabled, this command configures FTOS to flood LSAs on all interfaces.
graceful-restart helper-reject
Specify the OSPF router to not act as a helper during graceful restart.
Syntax
graceful-restart helper-reject ip-address
To return to default value, enter no graceful-restart helper-reject.
Parameters
Defaults
Not Configured
Command Modes
ROUTER OSPF
Command
History
ip ospf auth-change-wait-time
OSPF provides a grace period while OSPF changes its interface authentication type. During the grace
period, OSPF sends out packets with new and old authentication scheme till the grace period expires.
Syntax
ip ospf auth-change-wait-time seconds
To return to the default, use the no ip ospf auth-change-wait-time command.
Parameters
Defaults
zero (0) seconds
Command Modes
INTERFACE
Command
History
ip-address
Enter the OSPF router-id, in IP address format, of the restart router that will
not act as a helper during graceful restart.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
seconds
Enter seconds
Range: 0 to 300
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module