Dell Force10 MXL Blade - Show Interfaces Dampening

264 | Interfaces
www.dell.com | support.dell.com
show interfaces dampening
Display interface dampening information.
Syntax
show interfaces dampening [[interface] [summary] [detail]]
Parameters
Defaults
none
Command Modes
EXEC
Command
History
Example
Figure 14-32. show interfaces dampening Command Example
Related
Commands
interface
(OPTIONAL) Enter one of the following keywords and slot/port or number
information:
• For a Port Channel interface, enter the keyword
port-channel followed
by a number:
Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
summary (OPTIONAL) Enter the keyword summary to display the current summary
of dampening data, including the number of interfaces configured and the
number of interfaces suppressed, if any.
detail (OPTIONAL) Enter the keyword detail to display detailed interface
dampening data.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS#show interfaces dampening
Interface Supp Flaps Penalty Half-Life Reuse Suppress Max-Sup
State
tengig 3/2 Up 0 0 20 800 4500 120
tengig 3/10 Up 0 0 5 750 2500 20
FTOS#
dampening Configures dampening on an interface
show interfaces Displays information on a specific physical interface or virtual interface.
show interfaces configured Displays any interface with a non-default configuration.