EasyManua.ls Logo

Dell Force10 MXL Blade - Show Mac-Address-Table

Dell Force10 MXL Blade
732 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Layer 2 | 343
Command Modes
EXEC
EXEC Privilege
Command
History
show mac-address-table
Display the MAC address table.
Syntax
show mac-address-table [dynamic | static] [address mac-address | interface interface | vlan
vlan-id] [count [vlan vlan-id] [interface interface-type [slot [/port]]]]
Parameters
interface interface (OPTIONAL) Enter the keyword interface followed by the interface type,
slot and port information:
For a Port Channel interface, enter the keyword
port-channel followed
by a number:
Range: 1 to 128
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
vlan vlan-id (OPTIONAL) Enter the keyword vlan followed by the VLAN ID to display
the MAC address assigned to the VLAN.
Range: 1 to 4094.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
dynamic (OPTIONAL) Enter the keyword dynamic to display only those MAC
addresses learned dynamically by the switch. Optionally, you can also add
one of these combinations:
address/mac-address, interface/interface,
or
vlan vlan-id.
static (OPTIONAL) Enter the keyword static to display only those MAC address
specifically configured on the switch. Optionally, you can also add one of
these combinations:
address/mac-address, interface/interface, or
vlan vlan-id.
address mac-address (OPTIONAL) Enter the keyword address followed by a MAC address in
the nn:nn:nn:nn:nn:nn format to display information on that MAC address.
interface interface (OPTIONAL) Enter the keyword interface followed by the interface type,
slot and port information:
For a Port Channel interface, enter the keyword
port-channel followed
by a number:
Range: 1 to 128
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
interface interface-type (OPTIONAL) Instead of entering the keyword interface followed by the
interface type, slot and port information, as above, you can enter the
interface type, followed by just a slot number.

Table of Contents

Other manuals for Dell Force10 MXL Blade

Related product manuals