Dell Force10 MXL Blade - Show Rmon Log

Remote Monitoring (RMON) | 515
Command Modes
EXEC
Command History
Example 1
Figure 27-8. show rmon history index Command Example
Example 2
Figure 27-9. show rmon history brief Command Example
show rmon log
Display the contents of RMON log table.
Syntax
show rmon log [index] [brief]
Parameters
Defaults
none
Command Modes
EXEC
Command History
Example 1
Figure 27-10. show rmon log index Command Example
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS#show rmon history 6001
RMON history control entry 6001
interface: ifIndex.100974631 TenGigabitEthernet 2/1
bucket requested: 1
bucket granted: 1
sampling interval: 5 sec
owner: 1
status: OK
FTOS#
FTOS#show rmon history brief
index ifIndex interface
--------------------------------------------------------------------
-
6001 100974631 TenGigabitEthernet 2/1
6002 100974631 TenGigabitEthernet 2/1
6003 101236775 TenGigabitEthernet 2/1
6004 101236775 TenGigabitEthernet 2/1
9001 134529054 TenGigabitEthernet 3/1
9002 134529054 TenGigabitEthernet 3/1
9003 134791198 TenGigabitEthernet 3/1
9004 134791198 TenGigabitEthernet 3/1
FTOS#
index
(OPTIONAL) Enter the log index number to display just that entry.
brief (OPTIONAL) Enter the keyword brief to display the RMON Log Table in
an easy-to-read format.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS#show rmon log 2
RMON log entry, alarm table index 2, log index 1
log time: 14638 (THU AUG 12 22:10:40 2004)
description: 2
FTOS#