Dell Force10 MXL Blade - Show Memory; Show Processes Cpu

62 | Control and Monitoring
www.dell.com | support.dell.com
Related
Commands
show memory
View current memory usage on the MXL switch.
Syntax
show memory [stack-unit 0-5]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
The output for the show memory command displays the memory usage of LP part (sysdlp) of the
system. The Sysdlp is an aggregate task that handles all the tasks running on the CPU.
Example
Figure 4-18. show memory Command Example
show processes cpu
Display CPU usage information based on running processes.
Syntax
show processes cpu [management-unit 1-99 [details] | stack-unit 0-5 | summary | ipc | memory
[stack-unit
0-5]]
Parameters
show interfaces Display information on a specific physical interface or virtual interface.
show interfaces
transceiver
Displays the physical status and operational status of an installed transceiver. The
output also displays the transceiver’s serial number.
stack-unit 0-5 (OPTIONAL) Enter the keyword stack-unit followed by the stack unit ID of the
stack member to display memory information on the designated stack member.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS#show memory stack-unit 0
Statistics On Unit 0 Processor
===========================
Total(b) Used(b) Free(b) Lowest(b) Largest(b)
268435456 4010354 264425102 264375410 264425102
management-unit 1-99
[details]
(OPTIONAL) Display processes running in the control processor. The
1-99 variable sets the number of tasks to display in order of the highest
CPU usage in the past five (5) seconds. Add the
details keyword to display
all running processes (except sysdlp). See Example 3.
stack-unit 0-5 (OPTIONAL) Enter the keyword stack-unit followed by the stack
member ID (Range 0 to 5).
As an option of
show processes cpu, this option displays CPU usage
for the designated stack member. See Example 2.
Or, as an option of memory, this option limits the output of memory
statistics to the designated stack member. See Example 5.