Dell Force10 MXL Blade - Virtual Router Redundancy Protocol (VRRP); IPv4 VRRP Commands

Virtual Router Redundancy Protocol (VRRP) | 663
38
Virtual Router Redundancy Protocol (VRRP)
IPv4 VRRP Commands
The virtual router redundancy protocol (VRRP) chapter describes the commands:
• advertise-interval
• authentication-type
• clear counters vrrp
• debug vrrp
• description
• disable
• hold-time
• preempt
• priority
• show config
• show vrrp
• track
• virtual-address
• vrrp delay minimum
• vrrp delay reload
• vrrp-group
advertise-interval
Set the time interval between VRRP advertisements.
Syntax
advertise-interval seconds
To return to the default settings, use the no advertise-interval command.
Parameters
Defaults
1 second.
Command Modes
INTERFACE-VRRP
seconds
Enter a number of seconds.
Range: 1 to 255.
Default: 1 second.