Dell Force10 MXL Blade - Mac Learning-Limit Learn-Limit-Violation; Mac Learning-Limit Station-Move-Violation

Layer 2 | 341
mac learning-limit learn-limit-violation
Configure an action for a MAC address learning-limit violation.
Syntax
mac learning-limit learn-limit-violation {log | shutdown}
To return to the default, use the no mac learning-limit learn-limit-violation {log | shutdown}
command.
Parameters
Defaults
none
Command Modes
INTERFACE (conf-if-interface-slot/port)
Command
History
Usage
Information
This is supported on physical interfaces, static LAGs, and LACP LAGs.
Related
Commands
mac learning-limit station-move-violation
Specify the actions for a station move violation.
Syntax
mac learning-limit station-move-violation {log | shutdown-both | shutdown-offending |
shutdown-original}
To disable a configuration, use the no mac learning-limit station-move-violation command, followed
by the configured keyword.
Parameters
Defaults
none
Command Modes
INTERFACE (conf-if-interface-slot/port)
Command
History
log Enter the keyword log to generate a syslog message on a learning-limit
violation.
shutdown
Enter the keyword shutdown to shut down the port on a learning-limit
violation.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
show mac learning-limit Displays details of the mac learning-limit
log Enter the keyword log to generate a syslog message on a station move
violation.
shutdown-both Enter the keyword shutdown to shut down both the original and offending
interface and generate a syslog message.
shutdown-offending Enter the keyword shutdown-offending to shut down the offending
interface and generate a syslog message.
shutdown-original Enter the keyword shutdown-original to shut down the original interface
and generate a syslog message.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module