Dell Force10 MXL Blade - RADIUS Commands

548 | Security
www.dell.com | support.dell.com
Related
Commands
RADIUS Commands
The RADIUS commands supported by FTOS are:
• debug radius
• ip radius source-interface
• radius-server deadtime
• radius-server host
• radius-server key
• radius-server retransmit
• radius-server timeout
debug radius
View RADIUS transactions to assist with troubleshooting.
Syntax
debug radius
To disable debugging of RADIUS, use the no debug radius command.
Defaults
Disabled.
Command Modes
EXEC Privilege
Command
History
ip radius source-interface
Specify an interface’s IP address as the source IP address for RADIUS connections.
Syntax
ip radius source-interface interface
To delete a source interface, use the no ip radius source-interface command.
password Specifies a password for users on terminal lines.
show running-config Views the current configuration.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module