Dell Force10 MXL Blade - Show Tech-Support

72 | Control and Monitoring
www.dell.com | support.dell.com
Related
Commands
show tech-support
Display a collection of data from other show commands, necessary for Dell Force10 technical support
to perform troubleshooting on MXL switches.
Syntax
show tech-support [stack-unit unit-id | page]
Parameters
Command Modes
EXEC Privilege
Command
History
show version Displays the FTOS version.
show processes memory Displays the memory usage based on the running processes.
show system stack-ports Displays information about the stack ports on all switches in the stack.
show hardware stack-unit Displays the data plane and management plane input and output statistics of
a particular stack member.
stack-unit priority Configures the ability of the switch to become the management unit of a
stack.
stack-unit (OPTIONAL) Enter the keyword stack-unit to view CPU memory usage for the stack
member designated by
unit-id. Range: 0 to 5
page (OPTIONAL) Enter the keyword page to view 24 lines of text at a time.
Press the SPACE BAR to view the next 24 lines.
Press the ENTER key to view the next line of text.
When using the pipe command (
| ), enter one of these keywords to filter command output.
Refer to Chapter 2, CLI Basics for details on filtering commands.
save Enter the save keyword to save the command output.
flash: Save to local flash drive (flash://filename (max 20 chars))
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module