Dell Force10 MXL Blade - Show Hardware Layer3; Clear Hardware System-Flow

Debugging and Diagnostics | 683
clear hardware system-flow
Clear system-flow statistics from selected hardware components.
Syntax
clear hardware system-flow layer2 stack-unit 0-5 port-set 0-0 counters
Parameters
Defaults
none
Command Modes
EXEC Privilege
Command
History
Related
Commands
show hardware layer2 acl
Display Layer 2 ACL data for the selected stack member and stack member port-pipe.
Syntax
show hardware layer2 acl stack-unit 0-5 port-set 0-0
Parameters
Defaults
none
Command Modes
EXEC Privilege
Command
History
show hardware layer3
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware layer3 {acl | qos} stack-unit 0-5 port-set 0-0
Parameters
stack-unit 0-5 Enter the keyword stack-unit followed by 0 to 5 to select a particular stack
member and then enter one of the following command options to clear a
specific collection of data.
port-set 0–0 counters Enter the keyword port-set along with a port-pipe number, followed by the
keyword
counters to clear the system-flow counters on the selected
port-pipe.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
show hardware stack-unit Displays the data plane or management plane input and output statistics of the
designated component of the designated stack member.
stack-unit 0-5
Enter the keyword stack-unit followed by 0 to 5 to select a stack ID.
port-set 0-0
Enter the keyword port-set with a port-pipe number — 0.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
acl | qos
Enter either the keyword acl or the keyword qos to select between
ACL or QoS data.