Dell Force10 MXL Blade - Default Gateway

u-Boot | 83
boot write net config retries
Set the number of retries for network boot configuration failure.
Syntax
boot write net config retries <int>
Command Modes
uBoot
Command
History
u
Example
Figure 5-2. boot write net config retries Command Example
boot zero
Clears the primary, secondary, or default boot parameters.
Syntax
boot zero [primary | secondary | default]
Command Modes
uBoot
Command
History
u
default gateway
Set the default gateway IP address.
Syntax
default-gateway <ip-address>
Command Modes
uBoot
Command
History
u
enable
Change the access privilege level.
Syntax
enable [user | admin]
Command Modes
uBoot
Command
History
u
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
BOOT_USER # boot write net config retries 2
Updated number of Network Boot Config retries to 2.
BOOT_USER #
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module