82 | u-Boot
www.dell.com | support.dell.com
boot change
Change the operating system boot parameters.
Syntax
boot change [primary | secondary | default]
Command Modes
uBoot
Command
History
boot selection
Change the ROM bootstrap bootflash partition.
Syntax
boot selection [a | b]
Command Modes
uBoot
Command
History
boot show net config retries
Show the number of retries for network boot configuration failure.
Syntax
boot show net config retries
Command Modes
uBoot
Command
History
u
Example
Figure 5-1. boot show net config retries Command Example
Note: You cannot use the Tab key to complete commands in this mode.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
BOOT_USER# boot show net config retries
Number of Network Boot Config Retries is : 0
BOOT_USER #
To Next Page
Loading...
