Dell Force10 MXL Blade - Ip Ftp Username; Ip Telnet Server Enable

50 | Control and Monitoring
www.dell.com | support.dell.com
Command Modes
CONFIGURATION
Command
History
Related
Commands
ip ftp username
Assign a user name for outgoing FTP connection requests.
Syntax
ip ftp username username
Parameters
Defaults
No user name is configured.
Command Modes
CONFIGURATION
Command
History
Usage
Information
You must also configure a password with the ip ftp password command.
Related
Commands
ip telnet server enable
Enable the Telnet server on the switch.
Syntax
ip telnet server enable
To disable the Telnet server, use the no ip telnet server enable command.
Defaults
Enabled
Command Modes
CONFIGURATION
Command
History
Related
Commands
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
copy Copies files from and to the switch.
username
Enter a text string as the user name up to 40 characters long.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
ip ftp password Sets the password for the FTP connections.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
ip ssh server
Enables the SSH server on the system
.