Dell Force10 MXL Blade - Upgrade Boot

34 | File Management
www.dell.com | support.dell.com
upgrade boot
Upgrade the bootflash image or bootselector image.
Syntax
upgrade boot {all | bootflash-image | bootselector-image} stack-unit {0-5 | all} {booted | flash: |ftp: |
tftp: | usbflash:} (A: | B:}
Parameters
Dell Force10 Application... Software version
Copyright (c)... Copyright information
Build Time... Software build’s date stamp
Build Path... Location of the software build files loaded on the system
Dell Force10 uptime is... Amount of time the system has been up
System image... Image file name
Chassis Type:
System type (MXL 10/40GbE)
Control Processor:... Control processor information and amount of memory on processor.
256M bytes... Amount of boot flash memory on the system.
1 34-Port... Hardware configuration of the system, including the number and type of
physical interfaces available.
Table 3-2. show version Command Fields
Lines beginning with Description
all
Enter this keyword to change both the bootflash and bootselecter images.
bootflash-image
Enter this keyword to change the bootflash image.
bootselector-image
Enter this keyword to change the bootselector image
0-5
Enter this keyword to upgrade only the mentioned stack-unit
all
Enter this keyword to upgrade all the member stack-units
booted
Enter this keyword to upgrade from the current image in the MXL 10/40GbE
Switch.
ftp
After entering this keyword you can either follow it with the location of the
source file in this form:
//userid:password@hostip/filepath, or press
Enter to launch a prompt sequence.
tftp
After entering this keyword you can either follow it with the location of the
source file in this form:
//hostlocation/filepath, or press Enter to launch a
prompt sequence.
flash
After entering this keyword you can either follow it with the location of the
source file in this form:
//filepath, or press Enter to launch a prompt
sequence.
usbflash
After entering this keyword you can either follow it with the location of the
source file in this form:
//filepath, or press Enter to launch a prompt
sequence..
A
Enter this keyword to upgrade the bootflash partition A
B
Enter this keyword to upgrade the bootflash partition B