Dell Force10 MXL Blade - Advertise Dot1-Tlv; Advertise Dot3-Tlv

356 | Link Layer Discovery Protocol (LLDP)
www.dell.com | support.dell.com
advertise dot1-tlv
Advertise dot1 TLVs (Type, Length, Value).
Syntax
advertise dot1-tlv {port-protocol-vlan-id | port-vlan-id | vlan-name}
To remove advertised dot1-tlv, use the no advertise dot1-tlv {port-protocol-vlan-id | port-vlan-id |
vlan-name
} command.
Parameters
Defaults
Disabled
Command Modes
CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)
Command
History
Related
Commands
advertise dot3-tlv
Advertise dot3 TLVs (Type, Length, Value).
Syntax
advertise dot3-tlv {max-frame-size}
To remove advertised dot3-tlv, use the no advertise dot3-tlv {max-frame-size} command.
Parameters
Defaults
none
Command Modes
CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)
Command
History
port-protocol-vlan-id Enter the keyword port-protocol-vlan-id to advertise the port protocol
VLAN identification TLV.
port-vlan-id Enter the keyword port-vlan-id to advertise the port VLAN identification
TLV.
vlan-name
Enter the keyword vlan-name to advertise the vlan-name TLV.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
protocol lldp (Configuration) Enables LLDP globally.
debug lldp interface Debugs LLDP.
show lldp neighbors Displays the LLDP neighbors.
show running-config lldp Displays the LLDP running configuration.
max-frame-size Enter the keyword max-frame-size to advertise the dot3 maximum frame size.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module