Dell Force10 MXL Blade - Debug Ftpserver

Control and Monitoring | 43
debug ftpserver
View transactions during an FTP session when a user is logged into the FTP server.
Syntax
debug ftpserver
Command Modes
EXEC Privilege
Command
History
disable
Return to EXEC mode.
Syntax
disable [level]
Parameters
Defaults
1
Command Modes
EXEC Privilege
Command
History
do
Allows the execution of most EXEC-level commands from all CONFIGURATION levels without
returning to the EXEC level.
Syntax
do command
Parameters
Defaults
none
Command Modes
CONFIGURATION
INTERFACE
Command
History
Usage
Information
The following commands are not supported by the do command:
• enable
• disable
• exit
• config
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
level
(OPTIONAL) Enter a number for a privilege level of the FTOS.
Range: 0 to 15.
Default: 1
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
command
Enter an EXEC-level command.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module