Dell Force10 MXL Blade - Show Os-Version

File Management | 29
Example
Figure 3-7. show file-system Command Example
Related
Commands
show os-version
Display the release and software image version information of the image file specified.
Syntax
show os-version [file-url]
Parameters
Defaults
none
Command Modes
EXEC Privilege
Table 3-1. show file-systems Command Output Fields
Field Description
Size(b) Lists the size in bytes of the storage location. If the location is remote, no
size is listed.
Free(b) Lists the available size in bytes of the storage location. If the location is
remote, no size is listed.
Feature Displays the formatted DOS version of the device.
Type Displays the type of storage. If the location is remote, the word
network is listed.
Flags Displays the access available to the storage location. The following letters
indicate the level of access:
• r = read access
• w = write access
Prefixes Displays the name of the storage location.
FTOS#show file-systems
Size(b) Free(b) Feature Type Flags Prefixes
2143281152 2000936960 FAT32 USERFLASH rw flash:
15848660992 831594496 FAT32 USBFLASH rw usbflash:
- - - network rw ftp:
- - - network rw tftp:
- - - network rw scp:
FTOS#
format flash Erases all existing files and reformats the filesystem in the internal flash memory.
show file Displays the contents of a text file in the local filesystem.
show startup-config Displays the current SFM status.
file-url
(OPTIONAL) Enter the following location keywords and information:
• For a file on the internal Flash, enter
flash:// followed by the filename.
• For a file on an FTP server, enter
ftp://user:password@hostip/filepath
• For a file on a TFTP server, enter tftp://hostip/filepath
• For a file on the external Flash, enter usbflash:// followed by the filename.