Dell Force10 MXL Blade - Page 468

468 | Quality of Service (QoS)
www.dell.com | support.dell.com
bandwidth-percentage
Assign a percentage of weight to class/queue.
Syntax
bandwidth-percentage percentage
To remove the bandwidth percentage, use the no bandwidth-percentage command.
Parameters
Defaults
none
Command Modes
CONFIGURATION (conf-qos-policy-out)
Command
History
Usage
Information
The unit of bandwidth percentage is 1%. A bandwidth percentage of 0 is allowed and will disable the
scheduling of that class. If the sum of the bandwidth percentages given to all four classes exceeds
100%, the bandwidth percentage will automatically scale down to 100%.
Related
Commands
class-map
Create/access a class map. Class maps differentiate traffic so that you can apply separate quality of
service policies to each class.
Syntax
class-map {match-all | match-any} class-map-name [layer2]
Parameters
Defaults
Layer 3
Command Modes
CONFIGURATION
Command
History
percentage
Enter the percentage assignment of weight to class/queue.
Range: 1 to 100% (granularity 1%)
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
qos-policy-output Creates a QoS output policy.
match-all
Determines how packets are evaluated when multiple match criteria exist.
Enter the keyword
match-all to determine that the packets must meet all
the match criteria in order to be considered a member of the class.
match-any
Determines how packets are evaluated when multiple match criteria exist.
Enter the keyword
match-any to determine that the packets must meet at
least one of the match criteria in order to be considered a member of the
class.
class-map-name
Enter a name of the class for the class map in a character format (32
character maximum).
layer2 Enter the keyword layer2 to specify a Layer 2 Class Map.
Default: Layer 3
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module