Content Addressable Memory (CAM) | 151
show cam-acl-egress
Display the details of the FP groups allocated for the egress ACL.
Syntax
show cam-acl-egress
Defaults
none
Command Modes
EXEC
Command
History
Usage
Information
The display reflects the settings implemented with the cam-acl-egress command.
Example
Figure 8-3. show cam-acl-egress (default) Command Example
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS#show cam-acl-egress
-- Chassis Egress Cam ACL --
Current Settings(in block sizes)
L2Acl : 1
Ipv4Acl : 1
Ipv6Acl : 2
-- Stack unit 5 --
Current Settings(in block sizes)
L2Acl : 1
Ipv4Acl : 1
Ipv6Acl : 2
FTOS#
To Next Page
Loading...
