Dell Force10 MXL Blade - Page 206

206 | FIP Snooping
www.dell.com | support.dell.com
Command
History
clear fip-snooping statistics
Clears the statistics on the FIP packets snooped on all VLANs, a specified VLAN, or a specified port
interface.
Syntax
clear fip-snooping statistics [interface vlan vlan-id | interface port-type port/slot | interface
port-channel port-channel-number]
Parameters
Command Modes
EXEC Privilege
Command
History
feature fip-snooping
Enable the FIP snooping feature on a switch.
Syntax
feature fip-snooping
To disable the FIP snooping feature, use the no feature fip-snooping command.
Defaults
Disabled.
Command Modes
CONFIGURATION
Command
History
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
vlan-id Enter the VLAN ID of the FIP packet statistics to be cleared.
port-type port/slot
Enter the port-type and slot number of the FIP packet statistics to be cleared.
port-channel-
number]
Enter the port channel number of the FIP packet statistics to be cleared.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module