Dell Force10 MXL Blade - Page 208

208 | FIP Snooping
www.dell.com | support.dell.com
show fip-snooping config
Display the FIP snooping status and configured FC-MAP values.
Syntax
show fip-snooping config
Command Mode
• EXEC
• EXEC Privilege
Command
History
Example
Figure 11-1. show fip-snooping config Command Example
show fip-snooping enode
Display information on the ENodes in FIP-snooped sessions, including the ENode interface and MAC
address, FCF MAC address, VLAN ID and FC-ID.
Syntax
show fip-snooping enode [enode-mac-address]
Parameters
Command Mode
• EXEC
• EXEC Privilege
Command
History
Example
Figure 11-2. show fip-snooping enode Command Example
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS# show fip-snooping config
FIP Snooping Feature enabled Status: Enabled
FIP Snooping Global enabled Status: Enabled
Global FC-MAP Value: 0X0EFC00
FIP Snooping enabled VLANs
VLAN Enabled FC-MAP
---- ------- --------
100 TRUE 0X0EFC00
enode-mac-
address
Enter the MAC address of the ENodes to be displayed.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS# show fip-snooping enode
Enode MAC Enode Interface FCF MAC VLAN FC-ID
--------- --------------- ------- ---- -----
d4:ae:52:1b:e3:cd Te 0/11 54:7f:ee:37:34:40 100 62:00:11