Dell Force10 MXL Blade - Page 22

22 | File Management
www.dell.com | support.dell.com
cd
Change to a different working directory.
Syntax
cd directory
Parameters
Command Modes
EXEC Privilege
Command
History
copy
Copy one file to another location. FTOS supports IPv4 addressing for FTP, TFTP, and SCP (in the
hostip field).
Syntax
copy source-file-url destination-file-url
Parameters
Command Modes
EXEC Privilege
Command
History
Usage
Information
FTOS supports a maximum of 100 files, at the root directory level, on both the internal and external
Flash.
The usbflash commands are supported. For a list of approved USB vendors, refer to the FTOS Release
Notes.
When copying a file to a remote location (for example, using Secure Copy [SCP]), enter only the
keywords and FTOS prompts you for the rest of the information.
For example, when using SCP, you can enter copy running-config scp:
The running-config is the source, and the target is specified in the ensuing prompts. FTOS prompts you
to enter any required information, as needed for the named destination—remote destination,
destination filename, user ID and password, etc.
When you use the copy running-config startup-config command to copy the running configuration
(the startup configuration file amended by any configuration changes made since the system was
started) to the startup configuration file, FTOS creates a backup file on the internal flash of the startup
configuration.
directory
(OPTONAL) Enter one of the following:
•
flash: (internal Flash) or any sub-directory
• usbflash: (external Flash) or any sub-directory
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
file-url
Enter the following location keywords and information:
• To copy a file from the internal FLASH, enter
flash:// followed by the filename.
• To copy the running configuration, enter the keyword
running-config.
• To copy the startup configuration, enter the keyword
startup-config.
• To copy a file on the external FLASH, enter
usbflash:// followed by the filename.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module