Dell Force10 MXL Blade - Page 328

328 | iSCSI Optimization
www.dell.com | support.dell.com
show iscsi sessions detailed
Display detailed information on active iSCSI sessions on the switch.
Syntax
show iscsi sessions detailed [session isid]
Parameters
Command Mode
EXEC
EXEC Privilege
Command
History
Example
Figure 16-3. show iscsi sessions detailed Command Example
Related
Commands
isid
Enter the session’s iSCSi ID to display detailed information on specified iSCSi
session.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS# show isci sessions detailed
Session 0 :
-----------------------------------------------------------------------------
Target:iqn.2010-11.com.ixia:ixload:iscsi-TG1
Initiator:iqn.2010-11.com.ixia.ixload:initiator-iscsi-2c
Up Time:00:00:01:28(DD:HH:MM:SS)
Time for aging out:00:00:09:34(DD:HH:MM:SS)
ISID:806978696102
Initiator Initiator Target Target Connection
IP Address TCP Port IP Address TCPPort ID
10.10.0.44 33345 10.10.0.101 3260 0
Session 1 :
-----------------------------------------------------------------------------
Target:iqn.2010-11.com.ixia:ixload:iscsi-TG1
Initiator:iqn.2010-11.com.ixia.ixload:initiator-iscsi-35
Up Time:00:00:01:22(DD:HH:MM:SS)
Time for aging out:00:00:09:31(DD:HH:MM:SS)
ISID:806978696102
Initiator Initiator Target Target Connection
IP Address TCP Port IP Address TCPPort ID
10.10.0.53 33432 10.10.0.101 3260 0
show iscsi Display the currently configured iSCSI settings.
show iscsi sessions Display information on active iSCSI sessions on the switch.
show run iscsi show run iscsi