Dell Force10 MXL Blade - Page 349

Layer 2 | 349
Defaults
Not configured.
Command Modes
INTERFACE VLAN
Command
History
Usage
Information
To display information about a named VLAN, enter the show vlan command with the name parameter
or the show interfaces description command.
Related
Commands
show config
Display the current configuration of the selected VLAN.
Syntax
show config
Command Modes
INTERFACE VLAN
Example
Figure 18-5. show config Command Example for a Selected VLAN
Command
History
show vlan
Display the current VLAN configurations on the switch.
Syntax
show vlan [brief | id vlan-id | name vlan-name]
Parameters
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
description Assigns a descriptive text string to the interface.
interface vlan Configures a VLAN.
show vlan Displays the current VLAN configurations on the switch.
FTOS(conf-if-vl-100)#show config
!
interface Vlan 1
description a
no ip address
mtu 2500
shutdown
FTOS(conf-if-vl-100)#
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
brief (OPTIONAL) Enter the keyword brief to display the following information:
• VLAN ID
• VLAN name (left blank if none is configured.)
• Spanning Tree Group ID
• MAC address aging time
• IP address