Dell Force10 MXL Blade - Page 453

Per-VLAN Spanning Tree Plus (PVST+) | 453
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
Example 1
Figure 24-3. show spanning-tree pvst brief Command
Interface
(OPTIONAL) Enter one of the interface keywords along with the slot/port
information:
• For a Port Channel interface, enter the keyword
port-channel followed
by a number:
Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
guard
(OPTIONAL) Enter the keyword guard to display the type of guard enabled
on a PVST interface and the current port state.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS# show spanning-tree pvst vlan 2 brief
VLAN 2
Executing IEEE compatible Spanning Tree Protocol
Root ID Priority 32768, Address 001e.c9f1.00f3
Root Bridge hello time 2, max age 20, forward delay 15
Bridge ID Priority 32768, Address 001e.c9f1.00f3
We are the root of Vlan 2
Configured hello time 2, max age 20, forward delay 15
Bpdu filter disabled globally
Interface Designated
Name PortID Prio Cost Sts Cost Bridge ID PortID
---------- -------- ---- ------- --- ------- -------------------- --------
Po 23 128.24 128 1600 FWD 0 32768 001e.c9f1.00f3 128.24
Te 5/41 128.450 128 2000 DIS 0 32768 001e.c9f1.00f3 128.450
Te 5/50 128.459 128 2000 FWD 0 32768 001e.c9f1.00f3 128.459
Interface Bpdu
Name Role PortID Prio Cost Sts Cost Link-type Edge Filter
---------- ------ -------- ---- ------- --- ------- --------- ---- ------
Po 23 Desg 128.24 128 1600 FWD 0 P2P No No
Te 5/41 Dis 128.450 128 2000 DIS 0 P2P No No
Te 5/50 Desg 128.459 128 2000 FWD 0 P2P No No
FTOS#