Dell Force10 MXL Blade - Page 554

554 | Security
www.dell.com | support.dell.com
Defaults
Not configured.
Command Modes
CONFIGURATION
Command
History
Usage
Information
To list multiple TACACS+ servers to be used by the aaa authentication login command, configure this
command multiple times.
If you are not configuring the switch as a TACACS+ server, you do not need to configure the port,
timeout and key optional parameters. If you do not configure a key, the key assigned in the
tacacs-server key command is used.
Related
Commands
tacacs-server key
Configure a key for communication between a TACACS+ server and client.
Syntax
tacacs-server key [encryption-type] key
To delete a key, use the no tacacs-server key key command.
Parameters
Defaults
Not configured.
Command Modes
CONFIGURATION
Command
History
Usage
Information
The key configured with this command must match the key configured on the TACACS+ daemon.
timeout seconds (OPTIONAL) Enter the keyword timeout followed by the number of seconds
the switch waits for a reply from the TACACS+ server.
Range: 0 to 1000
Default: 10 seconds
key key (OPTIONAL) Enter the keyword key followed by a string up to 42 characters
long as the authentication key. This authentication key must match the key
specified in the tacacs-server key for the TACACS+ daemon.
Configure this parameter last because leading spaces are ignored.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
aaa authentication login Specifies the login authentication method.
tacacs-server key Configures a TACACS+ key for the TACACS server.
encryption-type (OPTIONAL) Enter either zero (0) or 7 as the encryption type for the key entered.
The options are:
• 0 is the default and means the key is not encrypted and stored as clear text.
• 7 means that the key is encrypted and hidden.
key
Enter a text string, up to 42 characters long, as the clear text password.
Leading spaces are ignored.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module