Dell Force10 MXL Blade - Page 568

568 | Security
www.dell.com | support.dell.com
Command Modes
EXEC
EXEC Privilege
Default
none
Command
History
Related
Commands
ip dhcp snooping database renew
Renew the binding table.
Syntax
ip dhcp snooping database renew
Command Modes
EXEC
EXEC Privilege
Default
none
Command
History
ip dhcp snooping trust
Configure an interface as trusted.
Syntax
[no] ip dhcp snooping trust
Command Modes
INTERFACE
Default
Untrusted
Command
History
interface type
Enter the keyword interface followed by the type of interface to which the host is
connected.
• For a Ten Gigabit Ethernet interface, enter the keyword
tengigabitethernet.
•
For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE.
slot/port
Enter the slot and port number of the interface.
lease time
Enter the keyword lease followed by the amount of time the IP address will be
leased.
Range: 1-4294967295
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
show ip dhcp snooping Displays the contents of the DHCP binding table.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module