Dell Force10 MXL Blade - Page 610

610 | Storm Control
www.dell.com | support.dell.com
storm-control unknown-unicast (Interface)
Configure the packets per second of unknown-unicast traffic allowed on a MXL Switch interface
(ingress only).
Syntax
storm-control unknown-unicast [packets_per_second] in
To disable unknown-unicast storm control on the interface, use the no storm-control
unknown-unicast [
packets_per_second] in command.
Parameters
Defaults
none
Command Modes
INTERFACE (conf-if-interface-slot/port)
Command
History
packets_per_second
Enter the packets per second of broadcast traffic allowed from the network.
Range: 0 to 33554368
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module