Dell Force10 MXL Blade - Page 617

Stacking Commands | 617
Related
Commands
show system stack-unit stack-group
Display the stack-groups present/configured for a MXL 10/40GbE switch stack unit.
Syntax
show system stack-unit <unit-number> stack-group [configured]
Parameters
Command Modes
EXEC Privilege
Command
History
Related
Commands
stack-unit stack group
Configure a 40GbE port for stacking mode.
Syntax
stack-unit <unit number> stack-group <group number>
Parameters
Command Modes
CONFIGURATION
Table 33-1. show system stack-ports Command Description
Field Description
Topology Lists the topology of stack ports connected: Ring, Daisy chain, or Standalone
Interface The unit/port ID of the connected stack port on this unit
Link Speed Link Speed of the stack port in Gb/s
Admin
Status
The only currently listed status is Up.
Connection The stack port ID to which this unit’s stack port is connected
redundancy
disable-auto-reboot
Resets the designated stack member.
show hardware stack-unit Displays the data plane or management plane input and output statistics of the
designated component of the designated stack member.
show system Displays the current status of all stack members or a specific member.
Upgrades the system image of the management unit.
unit number
<0-5>
Number of the member stack unit. Valid values: 0 to 5. Default: 0.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
reload Reboots FTOS.
show system Displays the current status of all stack members or a specific member.
unit number
<0-5>
Number of the member stack unit. Valid values: 0 to 5.
group number
<0-5>
Number of the stacked port on the unit. Valid values: 0 to 5.