674 | Virtual Router Redundancy Protocol (VRRP)
www.dell.com | support.dell.com
vrrp-group
Assign a VRRP ID to an interface. You can configure up to 12 VRRP groups per interface.
Syntax
vrrp-group vrrp-id
Parameters
Defaults
Not configured.
Command Modes
INTERFACE
Command
History
Usage
Information
The VRRP group only becomes active and sends VRRP packets when a virtual IP address is
configured. When you delete the virtual address, the VRRP group stops sending VRRP packets.
Related
Commands
vrrp-id
Enter a number as the group ID.
Range: 1 to 255.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
virtual-address Assigns up to 12 virtual IP addresses per VRRP group.
To Next Page
Loading...
