Dell Force10 MXL Blade - Page 86

86 | u-Boot
www.dell.com | support.dell.com
show boot blc
Show the boot loop counter value.
Syntax
show boot blc
Command Modes
uBoot
Command
History
u
Example
Figure 5-4. show boot blc Command Example
show boot selection
Display ROM bootstrap bootflash partition.
Syntax
show boot selection
Command Modes
uBoot
Command
History
u
Example
Figure 5-5. show boot selection Command Example
show bootflash
Show summary of boot flash information.
Syntax
show bootflash
Command Modes
uBoot
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
BOOT_USER # show boot blc ?
Total 1 possible command found.
Possible command list:
show boot blc
show the boot loop counter value
BOOT_USER # show boot blc
Boot Loop Counter : 10
BOOT_USER #
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
BOOT_USER # show boot selection
ROM BOOTSTRAP SELECTOR PARMETERS:
================================
Next ROM bootstrap set to occur from Bootflash partition A.
Last ROM bootstrap occurred from Bootflash partition B.
BOOT_USER #