Fujitsu Oracle SPARC M12-2 User Manual

Table 4-8
Active/Cold Replacement Procedure of the XSCFU
Work
Order
Task Reference
1 Checking the operating condition of the
system and the I/O device usage status
"9.2 Checking the Operation Status and
Resource Usage Status of Oracle Solaris"
2 Confirming the XSCFU to be replaced "8.2 Troubleshooting"
3 Confirming that the XSCFU to be
replaced is the standby or slave XSCF and
is currently replaceable (*1)
"
Table 2-16 XSCFU LEDs and Their
States"
4 Checking the logical domain assignment
status of CPU resources mounted in the
SPARC M12-2S requiring maintenance
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
5 Checking the logical domain assignment
status of memory resources mounted
in
the SPARC M12-2S requiring maintenance
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
6 Releasing I/O resources of the SPARC
M12-2S requiring maintenance from a
logical domain
"9.3 Releasing I/O Resources From a
Logical Domain"
7 Releasing the SPARC M12-2S requiring
maintenance from the physical partition
"9.4.3
Dynamically Releasing the
SPARC M12-2S From the Physical
Partition"
8 Releasing the SPARC M12-2S requiring
maintenance from the building block
configuration
"9.6.1 Releasing the SPARC M12-2S
From the Building Block Configuration"
9Placing the SPARC M12-2S requiring
maintenance into the cold state
"9.8.2 Removing the Power Cords"
10 Removing the XSCFU from the SPARC
M12-2S
"11.4 Removing the XSCFU"
11 Switching the SD card (*2) "11.5 Switching an SD Card"
12 Installing the XSCFU in the SPARC
M12-2S (*3)
"11.6 Installing the XSCFU"
13 Placing the SPARC M12-2S that required
maintenance into the hot state
"10.1.1 Installing a Power Cord"
14 Incorporating the SPARC M12-2S that
required maintenance into
the building
block configuration
"10.4.1 Incorporating the SPARC
M12-2S Into a Building Block
Configuration"
15 Confirming that there is no problem with
the replacement XSCFU
"10.5.3 Checking the FRU Status After
Maintenance"
16 Incorporating the SPARC M12-2S that
required maintenance into the physical
partition
"10.6.1 Incorporating the SPARC
M12-2S Into the Physical
Partition Using
PPAR DR"
Table 4-8 shows the workflow for active/cold replacement of the XSCFU.
Chapter 4 FRU Replacement Workflows 77

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English