Hach sc200 - Page 114

4 Dierential pH and ORP Sensors
Ordering Information continued
LIT2467 Rev 2
A13 Printed in U.S.A.
©Hach Company, 2013. All rights reserved.
In the interest of improving and updating its equipment,
Hach Company reserves the right to alter specifications to equipment at any time.
HACH COMPANY World Headquarters: Loveland, Colorado USA
United States: 800-227-4224 tel 970-669-2932 fax orders@hach.com
Outside United States: 970-669-3050 tel 970-461-3939 fax int@hach.com
hach.com
pHD sc Digital and pHD Analog Sensor Accessories
Cables
Extension cables are used only with digital sensors or digital
gateways when connecting to an sc Digital Controller.
6122400 Digital Extension Cable, 1 m (3.2 ft.)
5796000 Digital Extension Cable, 7.7 m (25 ft.)
5796100 Digital Extension Cable, 15 m (50 ft.)
5796200 Digital Extension Cable, 31 m (100 ft.)
Interconnect cables are used only with analog sensors, junction
box, and controller.
1W1100 Analog Interconnect Cable, order per foot
Digital Termination Box
Required when the cable between the sensor/gateway and sc
Digital Controller is 100 m (328 ft.) to 1000 m (3280 ft.)
5867000 Digital Termination Box
Analog Junction Box
Required when the cable between the analog sensor and
controller is greater than standard sensor cable. Includes
terminal strip and gasket.
60A2053 Junction Box, Surface-mount, aluminum
(includes mounting hardware)
60A9944 Junction Box, Pipe-mount, PVC (for 1/2-inch
diameter pipe, includes mounting hardware)
60G2052 Junction Box, Pipe-mount, PVC (for 1-inch
diameter pipe, includes mounting hardware)
76A4010-001 Junction Box, NEMA 4X (no mounting
hardware included)
Salt Bridges
The double junction salt bridge on the standard cell of all Hach
pHD sensors is field-replaceable.
SB-P1SV PEEK Sensor and Salt Bridge Body,
Kynar (PVDF) Outer Junction
SB-P2SV PEEK Sensor and Salt Bridge Body,
Ceramic Outer Junction
SB-P1SP
1
PEEK Sensor and Salt Bridge Body,
Kynar (PVDF) Outer Junction
SB-R1SV R ytonSensor and Salt Bridge Body
Kynar (PVDF) Outer Junction
1
Special perfluoroelastomer O-ring in place of the Viton
®
O-ring
pHD Sensor Reagents and Standards
25M1A1025-115 Standard Cell Solution, 500 mL
25M8A1002-101 Gel Powder, for high temperatur e applications, 2 g
pH Buffers
2283549 pH 7, 500 mL (1 pint)
2283449 pH 4, 500 mL (1 pint)
2283649 pH 10, 500 mL (1 pint)
ORP Reference Solutions (in resealable plastic bottles)
25M2A1001-115 200 mV 500 mL (1 pint)
25M2A1002-115 600 mV 500 mL (1 pint)
Mounting Hardware for pHD sc Differential Sensors
Sanitary Mount
MH018S8SZ 316 SS
Includes 2-inch sanitary tee and heavy-duty clamp. Cap and
EPDM compound gasket supplied with sensor; can be ordered
separately.
Union Mount
6131300 CPVC
6131400 316 SS
Includes standard 1-1/2 inch tee, union pipe with adapter, sealing
hub, and lock ring and Viton
®
O-ring.
Flow-through Mount
MH334N4NZ CPVC
MH314N4MZ 316 SS
Includes a standard 1-inch tee in respective material.
Insertion Mount
Digital Analog
5646300 CPVC 5646400 CPVC
5646350 316 SS 5646450 316 SS
Includes a 1-1/2 inch ball valve, 1-1/2 inch NPT close nipple,
sensor adapter with two Viton
®
O-rings and wiper, extension pipe,
pipe adapter, back tube, and lock ring.
Immersion Mount
Standard Hardware
Digital Analog
6136400 CPVC MH434A00B CPVC
6136500 316 SS MH414A00B 316 SS
Includes 1-inch by 4 ft. pipe and 1-inch x 1-inch NPT coupling.
(Pipe-mount junction box with terminal strip included in analog
hardware.)
Handrail Hardware
MH236B00Z CPVC
Includes 1-1/2 inch by 7.5 ft. CPVC pipe, and swivel/pivot/ pipe
clamp assembly.
Chain Mount Hardware
2881900 316 ss
Includes stainless steel bail, nuts, and washers. Does not include
chain. To be used with stainless steel immersion sensor only.
Ball Float Hardware
6131000 CPVC
Includes 1-1/2 inch by 7.5 ft. CPVC pipe, ball float assembly, and
swivel/pivot/ pipe clamp assembly.