Table C-1. Specifications (continued)
RS485 SERIAL PORT Used for:
• Application download/upload
• RS485 networking
(NOTE 4) 1 port
INPUT VOLTAGE -7 to +12 V differential max.
CABLE TYPE Shielded, twisted pair,
in compliance with EIA RS485
GALVANIC ISOLATION None
BAUD RATE 110 - 57600 bps
NODES Up to 4
OTHER DATA
CLOCK (RTC) Real-time clock functions (date and time)
BATTERY BACK-UP 7 years typical for RTC and system data
WEIGHT 310 g (10.9 oz.)
OPERATIONAL TEMPERATURE 0 to 50°C (32 to 12°F)
STORAGE TEMPERATURE -20 to 60°C (-4 to 140°F)
RELATIVE HUMIDITY (RH) 5% to 95% (non-condensing)
MOUNTING METHOD DIN-rail mounted (IP20/NEMA 1)
Panel mounted (IP65/NEMA 4X)
NOTES:
1) All 10 inputs can be set to pnp (source) or npn (sink) via a single jumper
and appropriate wiring
2) All 10 inputs can function in 12 VDC or 24 VDC via single jumper
and appropriate wiring
3) npn (sink) inputs use voltage supplied from the controller’s power supply
4) RS232/RS485 is is determined by jumper settings and wiring
C-3
To Next Page
Loading...
