PAGE 34 PROGRAMMING EXAMPLES
programming phone, or two-way radio. There are specific rules governing how the alarms can be assigned to
directories if the Directory Change Code is used. Refer to Program Code 2 Directories for more information
concerning these rules. This example starts by setting the telephone numbers in the two directories.
B1290: Enter Program Code
YOU: Directory Code
B1290: Enter Directory
YOU: Directory A
B1290: Directory A, Line One is...
YOU: Change
B1290: ‘beep’
YOU:
[DIAL]4032559544 [VOICE]
B1290: Directory A, Line One is DIAL 4032559544 VOICE
YOU: Next
B1290: Directory A, Line Two is...
YOU: Change
B1290: ‘beep’
YOU:
[DIAL]4032559598 [VOICE]
B1290: Directory A, Line Two is DIAL 4032559598 VOICE
YOU: Next
B1290: Directory A, Line Three is...
YOU: Quit
B1290: Enter Directory
YOU: Select Directory B
B1290: Directory B, Line One is...
YOU: Change
B1290: ‘beep’
YOU:
[DIAL]4032554437 [VOICE]
B1290: Directory B, Line One is DIAL 4032554437 VOICE
YOU: Next
B1290: Directory B, Line Two is...
YOU: Change
B1290: ‘beep’
YOU:
[DIAL]4032559545 [VOICE]
B1290: Directory B, Line Two is DIAL 4032559545 VOICE
YOU: Next
B1290: Directory B, Line Three is...
To Next Page
Loading...
