Field Descri
tion
Fast-leave Whether the fast-leave processing feature is enabled.
SSM-mapping Whether the IGMP SSM mapping feature is enabled.
Startup-query
Whether the IGMP querier sends IGMP general queries at the
startup query interval on startup:
• On—The IGMP querier performs the above action.
• Off—The IGMP querier does not perform the above action.
Other-querier-present-timer-expiry
Remaining time for the other querier present timer.
If the timer is disabled, this field displays Off.
IGMP groups reported in total
Total number of multicast groups that the interface has joined
dynamically. This field is not displayed if the interface does not
join multicast groups.
display igmp ssm-mapping
Use display igmp ssm-mapping to display IGMP SSM mappings.
Syntax
display igmp [ vpn-instance vpn-instance-name ] ssm-mapping group-address
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters. If you do not specify a VPN instance, the command displays information about the IGMP
SSM mappings on the public network.
group-address: Specifies a multicast group by its IP address in the range of 224.0.1.0 to
239.255.255.255.
Examples
# Display IGMP SSM mappings for the multicast group 232.1.1.1 on the public network.
<Sysname> display igmp ssm-mapping 232.1.1.1
Group: 232.1.1.1
Source list:
1.2.3.4
5.5.5.5
10.1.1.1
100.1.1.10
91
To Next Page
Loading...
Need help?
General
