HP 5900 series - Display L2-Multicast Mac

Field Descri
p
tion
Host ports (3 in total) Member ports, and the total number of the member ports.
display l2-multicast mac
Use display l2-multicast mac to display information about Layer 2 MAC multicast groups.
ticast mac [ mac-address ] [ vlan vlan-id ] [ slot slot-number ]
Predefine
ork-admin
Parameters
ups.
ot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot number. If
ou do not specify this option, the command displays information about the Layer 2 MAC multicast
Examples
out the Layer 2 MAC multicast groups for VLAN 2.
mac vlan 2
-0101
uccess
tal):
Host ports (1 in total):
XGE1/0/1
T tput
Syntax
display l2-mul
Views
Any view
d user roles
netw
network-operator
mac-address: Specifies a MAC multicast group by its MAC address. If you do not specify a MAC
multicast group, the command displays information about all Layer 2 MAC multicast gro
vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a VLAN,
the command displays information about Layer 2 MAC multicast groups for all VLANs.
sl
y
groups on the master device.
# Display information ab
<Sysname> display l2-multicast
Total 1 MAC entries.
VLAN 2: Total 1 MAC entries.
MAC group address: 0100-5e01
Attribute: s
Host slots (0 in to
able 9 Command ou
Field Descri
p
tion
Total 1 MAC entries Layer 2 MAC multicast groups. Total number of
VLAN 2: Total 1 MAC entries Total number of Layer 2 MAC multicast groups in VLAN 2.
Attribute
Entry attribute:
• success—Processing succeeds.
• fail—Processing fails.
11