HP 5900 series - Select a print quality

• The igmp-snooping max-response-time command takes effect on the current VLAN.
For a VLAN, the igmp-snooping max-response-time command takes priority over the
ax-response-time command in IGMP-snooping view.
Examples
response time for IGMP general queries to 5 seconds.
gmp-snooping] max-response-time 5
Related c
overflow-replace (IGMP-snooping view)
Use undo overflow-replace to disable the multicast group replacement feature globally.
Syntax
undo overflow-replace [ vlan vlan-list ]
Default
The multicast group replacement feature is disabled globally.
Views
iew
Predefine
ork-admin
Paramete
for the VLAN ID is 1
f you do not specify a VLAN, the command takes effect on all VLANs.
Usage gu
d the igmp-snooping overflow-replace command have the same function but different
flow-replace command takes priority over the overflow-replace
mmand in IGMP-snooping view.
Examples
p replacement feature globally for VLAN 2.
m
# Set the global maximum
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-i
ommands
igmp-snooping max-response-time
Use overflow-replace to enable the multicast group replacement feature globally.
overflow-replace [ vlan vlan-list ]
IGMP-snooping v
d user roles
netw
rs
vlan vlan-list: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a VLAN by its
ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The value range
to 4094. I
idelines
This command takes effect only on the multicast groups that a port joins dynamically.
This command an
effective ranges:
• The overflow-replace command in IGMP-snooping view takes effect on all ports.
• The igmp-snooping overflow-replace command takes effect on the current port.
For a port, the igmp-snooping over
co
# Enable the multicast grou
<Sysname> system-view
[Sysname] igmp-snooping
40