HP 5900 series Command Reference

ipv6 pim neighbor-policy
configure an IPv6 PIM hello policy to define the legal source address
range for hello messages.
bor-policy acl6-number
neighbor-policy
Default
PIM hello policies are not configured, and all the received hello messages are considered legal.
Views
iew
Predefine
Parameters
elines
s in hello messages.
d in an ACL rule, the rule does not take effect. The other optional
CL rules are ignored.
Examples
LAN-interface 100, so that only the devices on the
00
[Sysname-acl6-basic-2000] rule permit source fe80:101::101 64
[Sysname-Vlan-interface100] ipv6 pim neighbor-policy 2000
ipv6 pim require-genid
Use ipv6 pim require-genid to enable dropping hello messages without the generation ID options.
e-genid
require-genid
Default
Hello messages without the generation ID options are accepted.
Use ipv6 pim neighbor-policy to
Use undo ipv6 pim neighbor-policy to restore the default.
Syntax
ipv6 pim neigh
undo ipv6 pim
IPv6
Interface v
d user roles
network-admin
acl6-number: Specifies an IPv6 basic ACL number in the range of 2000 to 2999.
Usage guid
You can configure this command to guard against hello message spoofing.
In an IPv6 basic ACL, the source keyword matches the source addres
If you specify the vpn-instance keywor
parameters except the time-range keyword and the fragment keyword in the A
# Configure an IPv6 PIM hello policy on V
FE80:101::101/64 subnet can become PIM neighbors of this switch.
<Sysname> system-view
[Sysname] acl ipv6 number 20
[Sysname-acl6-basic-2000] quit
[Sysname] interface vlan-interface 100
Use undo ipv6 pim require-genid to restore the default.
Syntax
ipv6 pim requir
undo ipv6 pim
332

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)