HP 5900 series - Jp-Pkt-Size (PIM View); Pim

140
[Sysname-pim] holdtime join-prune 280
Related commands
• pim holdtime join-prune
• timer join-prune (PIM view)
jp-pkt-size (PIM view)
Use jp-pkt-size to set the maximum size of each join/prune message.
Use undo jp-pkt-size to restore the default.
Syntax
jp-pkt-size size
undo jp-pkt-size
Default
The maximum size of a join/prune message is 8100 bytes.
Views
PIM view
Predefined user roles
network-admin
Parameters
size: Sets the maximum size of each join/prune message, in the range of 100 to 8100 bytes.
Examples
# Set the maximum size of each join/prune message to 1500 bytes on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] jp-pkt-size 1500
pim
Use pim to enter PIM view.
Use undo pim to remove all configurations in PIM view.
Syntax
pim [ vpn-instance vpn-instance-name ]
undo pim [ vpn-instance vpn-instance-name ]
Views
System view
Predefined user roles
network-admin