vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a VLAN,
the command displays information about Layer 2 IPv6 MAC multicast groups for all VLANs.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot number. If
you do not specify this option, the command displays information about the Layer 2 IPv6 MAC multicast
groups on the master device.
Examples
# Display information about the Layer 2 IPv6 MAC multicast groups for VLAN 2.
<Sysname> display ipv6 l2-multicast mac vlan 2
Total 1 MAC entries.
VLAN 2: Total 1 MAC entries.
MAC group address: 3333-0000-0101
Attribute: success
Host slots (0 in total):
Host ports (1 in total):
XGE1/0/1
Table 57 Command output
Field Descri
tion
Total 1 MAC entries Total number of Layer 2 IPv6 MAC multicast groups.
VLAN 2: Total 1 MAC entries Total number of Layer 2 IPv6 MAC multicast groups in VLAN 2.
MAC group address IPv6 address of the Layer 2 Ipv6 MAC multicast group.
Attribute
Entry attribute:
• success—Processing succeeds.
• fail—Processing fails.
Host slots (0 in total)
Member IDs of the member devices that have member ports and the total
number of the member devices (excluding the specified member device).
Host ports (1 in total) Member ports, and the total number of the member ports.
display ipv6 l2-multicast mac forwarding
Use display ipv6 l2-multicast mac forwarding to display IPv6 MAC multicast group entries.
Syntax
display ipv6 l2-multicast mac forwarding [ mac-address ] [ vlan vlan-id ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
196