HP 5900 series Command Reference

142
[Sysname-Vlan-interface100] pim bfd enable
Related commands
• pim dm
• pim sm
pim bsr-boundary
Use pim bsr-boundary to configure a PIM-SM domain border, namely, a bootstrap message boundary.
Use undo pim bsr-boundary to remove the configured PIM-SM domain border.
Syntax
pim bsr-boundary
undo pim bsr-boundary
Default
No PIM-SM domain border is configured.
Views
Interface view
Predefined user roles
network-admin
Examples
# Configure VLAN-interface 100 as a PIM-SM domain border.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim bsr-boundary
Related commands
• c-bsr (PIM view)
• multicast boundary
pim dm
Use pim dm to enable PIM-DM.
Use undo pim dm to disable PIM-DM.
Syntax
pim dm
undo pim dm
Default
PIM-DM is disabled.
Views
Interface view

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)