EasyManuals Logo

HP 5900 series Command Reference

HP 5900 series
364 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #94 background imageLoading...
Page #94 background image
Syntax
reset multicast [ vpn-instance vpn-instance-name ] forwarding-table { { source-address [ mask
{ mask-length | mask } ] | group-address [ mask { mask-length | mask } ] | incoming-interface
{ interface-type interface-number } } * | all }
Views
User view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, this command clears the multicast forwarding
entries on the public network.
source-address: Specifies a multicast source address.
group-address: Specifies a multicast group address in the range of 224.0.0.0 to 239.255.255.255.
mask-length: Specifies an address mask length. The default value is 32. For a multicast group address,
the value range for this argument is 4 to 32. For a multicast source address, the value range for this
argument is 0 to 32.
mask: Specifies an address mask. The default is 255.255.255.255.
incoming-interface: Specifies the multicast forwarding entries that contain the specified incoming
interface.
interface-type interface-number: Specifies an incoming interface by its type and number.
all: Specifies all multicast forwarding entries.
Usage guidelines
When a forwarding entry is deleted from the multicast forwarding table, the associated routing entry is
also deleted from the multicast routing table.
Examples
# On the public network, clear the multicast forwarding entries related to the multicast group 225.5.4.3
from the multicast forwarding table.
<Sysname> reset multicast forwarding-table 225.5.4.3
Related commands
display multicast forwarding-table
reset multicast routing-table
Use reset multicast routing-table to clear the multicast routing entries.
Syntax
reset multicast [ vpn-instance vpn-instance-name ] routing-table { { source-address [ mask { mask-length
| mask } ] | group-address [ mask { mask | mask-length } ] | incoming-interface interface-type
interface-number } * | all }
Views
User view
84

Table of Contents

Other manuals for HP 5900 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 5900 series and is the answer not in the manual?

HP 5900 series Specifications

General IconGeneral
Ports48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity1.28 Tbps
MAC Address Table Size128K
Routing ProtocolsRIP, OSPF, BGP, IS-IS
VLAN Support4K VLANs
Dimensions440 x 460 x 44 mm
Operating Temperature0°C to 45°C
Operating Humidity10% to 90% (noncondensing)

Related product manuals