HP 5900 series Command Reference

Field Descri
p
tion
Total WrongIF event dropped Number of times that the WrongIF event has been dropped.
Total SPT switch event sent Number of times that the SPT-switch event has been sent.
NoCache rate limit Rate limit for sending the NoCache event, in pps.
WrongIF rate limit Rate limit for sending the WrongIF event, in packets per 10 seconds.
Total timer of register suppress
timeout
Number of times that the registration suppression has timed out in total.
Related commands
reset multicast forwarding event
display multicast forwarding-table
Use display multicast forwarding-table to display multicast forwarding entries.
Syntax
display multicast [ vpn-instance vpn-instance-name ] forwarding-table [ source-address [ mask
{ mask-length | mask } ] | group-address [ mask { mask-length | mask } ] | incoming-interface
interface-type interface-number | outgoing-interface { exclude | include | match } interface-type
interface-number | slot slot-number| statistics ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays multicast forwarding
entries on the public network.
source-address: Specifies a multicast source address.
group-address: Specifies a multicast group address in the range of 224.0.0.0 to 239.255.255.255.
mask-length: Specifies an address mask length. The default value is 32. For a multicast group address,
the value range for this argument is 4 to 32. For a multicast source address, the value range for this
argument is 0 to 32.
mask: Specifies an address mask. The default value is 255.255.255.255.
incoming-interface: Specifies the multicast forwarding entries that contain the specified incoming
interface.
interface-type interface-number: Specifies an incoming interface by its type and number.
outgoing-interface: Specifies the multicast forwarding entries that contain the specified outgoing
interface.
exclude: Specifies the multicast forwarding entries that do not contain the specified interface in the
outgoing interface list.
70

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)