HP 5900 series - Version (MLD-Snooping View)

237
Related commands
mld-snooping source-deny
version (MLD-snooping view)
Use version to specify an MLD snooping version for VLANs.
Use undo version to restore the default.
Syntax
version version-number vlan vlan-list
undo version vlan vlan-list
Default
The MLD snooping version is 1.
Views
MLD-snooping view
Predefined user roles
network-admin
Parameters
version-number: Specifies an MLD snooping version, 1 or 2.
vlan vlan-list: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a VLAN by its
ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The value range for the VLAN ID is 1
to 4094.
Usage guidelines
You must enable MLD snooping for the specified VLANs before you execute this command.
This command and the mld-snooping version command in VLAN view have the same function but
different effective ranges:
• The version command in MLD-snooping view takes effect on the specified VLANs.
• The mld-snooping version command takes effect on the current VLAN.
For a VLAN, the mld-snooping version command and the version command in MLD-snooping view have
the same priority, and the most recent configuration takes effect.
Examples
# Enable MLD snooping for VLAN 2 through VLAN 10, and specify MLD snooping version 2 for these
VLANs.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] enable vlan 2 to 10
[Sysname-mld-snooping] version 2 vlan 2 to 10
Related commands
• enable (MLD-snooping view)
• mld-snooping enable
• mld-snooping version