HP 5900 series Command Reference

vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a VLAN,
Examples
e dynamic IGMP snooping forwarding entries for all multicast groups.
ing group all
Related commands
reset
ic router ports.
snooping router-port { all | vlan vlan-id ]
ser roles
Paramete
an vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a VLAN,
er ports for all VLANs.
Examples
ll dynamic router ports.
router-port all
Related commands
reset
Use reset igmp-snooping statistics to clear statistics for the IGMP messages and PIMv2 hello messages
g.
snooping statistics
user roles
Examples
# Clear the statistics for all IGMP messages and PIMv2 hello messages learned through IGMP snooping.
<Sysname> reset igmp-snooping statistics
the command removes dynamic IGMP snooping forwarding entries for all VLANs.
# Remove th
<Sysname> reset igmp-snoop
display igmp-snooping group
igmp-snooping router-port
Use reset igmp-snooping router-port to remove dynam
Syntax
reset igmp-
Views
User view
Predefined u
network-admin
rs
all: Specifies all dynamic router ports.
vl
the command removes dynamic rout
# Remove a
<Sysname> reset igmp-snooping
display igmp-snooping router-port
igmp-snooping statistics
learned through IGMP snoopin
Syntax
reset igmp-
Views
User view
Predefined
network-admin
42

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)