display ipv6 multicast-vlan group
Use display ipv6 multicast-vlan group to display information about IPv6 multicast groups in IPv6
multicast VLANs.
Syntax
display ipv6 multicast-vlan group [ ipv6-source-address | ipv6-group-address | slot slot-number |
verbose | vlan vlan-id ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address. If you do not specify an IPv6
multicast source, the command displays information about IPv6 multicast groups in IPv6 multicast VLANs
for all IPv6 multicast sources.
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address in the range of FFxy::/16
(excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where "x" and "y" represent any hexadecimal
numbers from 0 to F. If you do not specify an IPv6 multicast group, the command displays information
about all IPv6 multicast groups in IPv6 multicast VLANs.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot number. If
you do not specify this option, the command displays information about IPv6 multicast groups in IPv6
multicast VLANs on the master device.
verbose: Displays detailed information. If you do not specify this keyword, the command displays brief
information.
vlan vlan-id: Specifies an IPv6 multicast VLAN in the range of 1 to 4094. If you do not specify a multicast
VLAN, the command displays information about IPv6 multicast groups in all IPv6 multicast VLANs.
Examples
# Display detailed information about all IPv6 multicast groups in all IPv6 multicast VLANs.
<Sysname> display ipv6 multicast-vlan group verbose
Total 6 entries.
IPv6 multicast VLAN 10: Total 3 entries.
(2::2, FF0E::2)
Flags: 0x70000020
Sub-VLANs (1 in total):
VLAN 40
(22::22, FF0E::4)
Flags: 0x70000030
Sub-VLANs (1 in total):
VLAN 40
(::, FF0E::10)
Flags: 0x10000030
247