Parameters
interval: Sets an IGMP last member query interval in the range of 1 to 25 seconds.
idelines Usage gu
e for IGMP group-specific queries.
on
takes effect on the current VLAN.
r a VLAN, the igmp-snooping last-member-query-interval command takes priority over the
iew.
Examples
ery-interval 3
max-r
Use max-response-time to set the global maximum response time for IGMP general queries.
to restore the default.
Syntax
max-response-time interval
esponse time for IGMP general queries is 10 seconds.
view
ser roles
Usage gu
e time for IGMP general queries.
unction but
• The max-response-time command in IGMP-snooping view takes effect on all VLANs.
The IGMP last member query interval determines the interval for sending IGMP group-specific queries
and the maximum response tim
This command and the igmp-snooping last-member-query-interval command have the same functi
but different effective ranges:
• The last-member-query-interval command in IGMP-snooping view takes effect on all VLANs.
• The igmp-snooping last-member-query-interval command
Fo
last-member-query-interval command in IGMP-snooping v
# Set the IGMP last member query interval to 3 seconds.
system-view <Sysname>
[Sysname] igmp-snooping
[Sysname-igmp-snooping] last-member-qu
Related commands
igmp-snooping last-member-query-interval
esponse-time (IGMP-snooping view)
Use undo max-response-time
undo max-response-time
Default
The global maximum r
Views
IGMP-snooping
Predefined u
network-admin
Parameters
interval: Sets the maximum response time for IGMP general queries, in the range of 1 to 3174 seconds.
idelines
To avoid mistakenly deleting multicast group members, set IGMP general query interval to be greater
than the maximum respons
This command and the igmp-snooping max-response-time command have the same f
different effective ranges:
39
To Next Page
Loading...
Need help?
General
