HP 5900 series Command Reference

Syntax
ipv6 multicast routing [ vpn-instance vpn-instance-name ]
vpn-instance-name ]
outing is disabled.
ser roles
paramete
ce vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
haracters. If you do not specify a VPN instance, the command enables IPv6 multicast routing
Usage gu
ther Layer 3 IPv6 multicast commands take effect only when IPv6 multicast routing is enabled.
enabled.
Examples
r IPv6 MRIB view on the public network.
he VPN instance mvpn.
stance mvpn
load-splitting (IPv6 MRIB view)
Use load-splitting to enable load splitting of IPv6 multicast traffic.
default.
Syntax
load-splitting { source | source-group }
Pv6 multicast traffic is disabled.
ser roles
undo ipv6 multicast routing [ vpn-instance
Default
IPv6 multicast r
Views
System view
Predefined u
network-admin
rs
vpn-instan
of 1 to 31 c
on the public network.
idelines
O
The switch does not forward IPv6 multicast packets before IPv6 multicast routing is
# Enable IPv6 multicast routing and ente
<Sysname> system-view
[Sysname] ipv6 multicast routing
[Sysname-mrib6]
# Enable IPv6 multicast routing and enter IPv6 MRIB view in t
<Sysname> system-view
[Sysname] ipv6 multicast routing vpn-in
[Sysname-mrib6-mvpn]
Use multicast load-splitting to restore the
undo load-splitting
Default
Load splitting of I
Views
IPv6 MRIB view
Predefined u
network-admin
269

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)