HP 5900 series - Igmp Other-Querier-Present-Interval; Igmp Query-Interval

<Sysname> system-view
[Sysname] igmp non-stop-routing
igmp other-querier-present-interval
Use igmp other-querier-present-interval to set the IGMP other querier present timer on an interface.
Use undo igmp other-querier-present-interval to restore the default.
Syntax
igmp other-querier-present-interval interval
undo igmp other-querier-present-interval
Default
The IGMP other querier present timer is calculated by the following formula:
[ IGMP general query interval ] × [ IGMP querier's robustness variable ] + [ maximum response time for
IGMP general queries ] / 2.
Views
Interface view
Predefined user roles
network-admin
Parameters
interval: Sets an IGMP other querier present timer in the range of 1 to 31744 seconds.
Usage guidelines
This command and the other-querier-present-interval command have the same function but different
effective ranges:
• The other-querier-present-interval command takes effect on all interfaces.
• The igmp other-querier-present-interval command takes effect on the current interface.
For an interface, the igmp other-querier-present-interval command takes priority over the
other-querier-present-interval command.
Examples
# Set the IGMP other querier present timer to 125 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] igmp other-querier-present-interval 125
Related commands
other-querier-present-interval (IGMP view)
igmp query-interval
Use igmp query-interval to set the IGMP general query interval on an interface.
Use undo igmp query-interval to restore the default.
98